Quick answer
How do I log in to my JadeKVM server the first time?
Open the server in the JadeKVM dashboard and copy its SSH command: ssh root@ and the IPv4. With a key pasted at checkout, root logs in with that key only. Without one, use the temporary root password from the server page, then change it with passwd at once. The IP appears within 1 hour of payment.
In brief
- User: root, on port 22, at the IPv4 shown on the server page.
- With a key: only the key opens root; password login stays off.
- Without a key: a temporary root password, masked until you press Show; change it with passwd.
- Lost key: a reinstall with a new public key is the way back in; it wipes the disk.
How do you connect with an SSH key?
These commands work in the Terminal of macOS and Linux and in Windows PowerShell, which ships an OpenSSH client. JadeKVM checked each label against its client area on 16 November 2026.
Make a key, if you have none
Run
ssh-keygen -t ed25519and press Enter to accept the defaults. The checkout shows this same command.Copy the public half
Run
cat ~/.ssh/id_ed25519.puband paste that one line at checkout, as the order guide shows. The file without .pub stays on your computer.Wait for Running
Once the status reads Running, the server page shows the IPv4 and the SSH command with a copy button.
Connect
Paste the command, for example
ssh [email protected], and type yes to accept the host key the first time.
Which login applies to my server?
It depends on one checkout choice: whether a public key was pasted.
| Case | How root logs in | Password login | After a reinstall |
|---|---|---|---|
| Key pasted at checkout | Your private key | Off | Same key, unless a new one is given |
| No key at checkout | Temporary password from the server page | On until you turn it off | A new temporary password, or your key if you give one |
| Key added later by hand | Your private key, plus the password until you disable it | Your choice in sshd_config | Back to the checkout choice |
How do I use the temporary root password safely?
Log in with it once, then replace it and add a key. This case applies when the key box was left empty during the order. The server page shows a card titled Root login with a temporary password: the password stays masked until you press Show, and a copy button sits next to it.
- Connect with
ssh root@and the IPv4, and paste the password. - Run
passwdand type a new password twice. The old one stops working, and nobody on the JadeKVM team knows the new one. - Add your public key to
/root/.ssh/authorized_keys. - Set
PasswordAuthentication noin/etc/ssh/sshd_config, then restart the SSH service.
Keep a second session open while you change step 4, so a typo does not lock you out. On Ubuntu, files in /etc/ssh/sshd_config.d/ can override the main file: check them too.
mkdir -p /root/.ssh && chmod 700 /root/.ssh
nano /root/.ssh/authorized_keys # paste your .pub line, save
chmod 600 /root/.ssh/authorized_keys
sed -i 's/^#\?PasswordAuthentication.*/PasswordAuthentication no/' /etc/ssh/sshd_config
systemctl restart ssh # on AlmaLinux or Rocky Linux: systemctl restart sshdWhat if the connection is refused or times out?
First check that the status is Running and that you use the IPv4 shown, as root. Then:
- Permission denied (publickey): the key on your computer is not the one pasted at checkout. Point to it with
ssh -i ~/.ssh/id_ed25519 root@IP. - Timeout: test the path with the commands in the latency test guide; a firewall you set may block port 22.
- Lost key or password: request a reinstall with a new public key from the server page. It erases the whole disk.
If none of this helps, follow server down or not delivered. JadeKVM's support line: A person answers support emails within 12 hours, seven days a week, including help with SSH keys, reinstalls and firewall rules.
SSH login questions
Which user do I log in with?
root. The server page shows the full command, ssh root@ followed by the IPv4.
Can JadeKVM recover my private key?
No. The private key never leaves your computer. Nobody from the support team will ever ask for your account number, your root password or your private SSH key, by email or in a chat.
Does the IPv6 address work for SSH?
Each server has a routed IPv6 /64 next to its IPv4; use the IPv4 shown on the server page for the first login.
Which systems can I pick?
Debian 13, Debian 12, Ubuntu 24.04 LTS, Ubuntu 22.04 LTS, AlmaLinux 10, Rocky Linux 10. Linux only: Debian, Ubuntu, AlmaLinux or Rocky Linux from JadeKVM images; Windows is not offered.
Can I order without a key and add one later?
Yes. Add it to /root/.ssh/authorized_keys, test a key login, then turn password login off.
Verdict
- Paste a key at checkout and the first JadeKVM login is a single
ssh root@command, with no password ever set. - Without a key, change the temporary password with
passwdat once and add a key the same day.
Sources (3)
- ssh-keygen manual page — OpenBSD (read 2026-11-16)
- sshd_config manual page — OpenBSD (read 2026-11-16)
- OpenSSH for Windows overview — Microsoft (read 2026-11-16)
Order with your key ready
Paste the .pub line at checkout and root logs in with it from the first minute. Pendant: 1 shared vCPU, 3 GB RAM, 45 GB NVMe, 1 TB a month.
- Built by a person, 1 hour at most after confirmation
- Lost days credited back if a server cannot be delivered
- Pay in BTC, XMR, USDT, USDC, ETH, SOL or LTC
- DomaineGoat LLC · Panama